Cours en Ligne pour Aspirants Architectes

Joseph Kelly Joseph Kelly

0 Cours inscrits • 0 Cours terminé

Biographie

800-150 Demotesten & 800-150 Testengine

DeutschPrüfung ist der beste Katalysator für den Erfolg der IT-Fachleute, Viele Kandidaten, die Cisco 800-150 IT-Zertifizierungsprüfungen bestanden haben, haben Schulungsunterlagen von DeutschPrüfung benutzt. Unser Expertenteam von DeutschPrüfung hat die neuesten und effizientesten Prüfungsfragen und Antworten zur Cisco 800-150 Zertifizierungsteste.

Cisco 800-150 Prüfungsplan:

Thema
Einzelheiten

Thema 1

Networking Foundations: This section of the exam measures the skills of a Network Engineer and covers the basic building blocks of computer networking. It explains different types of networks like local area networks and wireless networks, and introduces lightweight wireless LANs. It describes the layers of communication models like the OSI model and TCP
IP stack, and explains how data moves across networks. It also discusses the physical cabling used in networks, such as Ethernet and fiber optics. Students will learn about network switching, IP addressing, subnetting, and routing at Layer 3. The section also introduces Cisco’s campus network devices, data center switches, UCS servers, and collaboration devices, describing their roles and functions in the network.

Thema 2

Cisco UCS and Data Center Architecture: This section of the exam measures the skills of a Data Center Engineer and introduces Cisco’s UCS and data center solutions. It explains the devices found in a data center, including switches, UCS servers, and director switches, and describes different server deployment models. Students will also learn about virtualization components like virtual machines, hypervisors, cloud computing concepts, and deployment models. The section covers how Cisco UCS devices fit into campus networks, edge locations, and data centers, and explains the key components and connections used in UCS architecture.

Thema 3

Cisco Hardware Replacement: This section of the exam measures the skills of a Technical Support Engineer and teaches how to safely and correctly replace Cisco hardware. It explains safety procedures such as creating safe work zones and handling electrostatic discharge. Students learn the step-by-step processes to replace a wide range of Cisco devices, from switches and routers to firewalls, UCS servers, and collaboration endpoints. It also covers configuring Cisco NX-OS software, including understanding operating modes, boot procedures, and password recovery, and introduces Cisco collaboration endpoint solutions like IP phones and video systems.

Thema 4

Common Service Tasks and Tools: This section of the exam measures the skills of a Technical Support Engineer and focuses on tasks commonly needed to manage Cisco devices. It explains how devices boot up, introduces common Cisco IOS commands, and identifies tools for file management. It shows how to confirm physical connections, remotely access devices, and connect to the console port. It also covers how to capture the status of a device, recover passwords, and replace devices by using proper tools. Students are also taught how to find serial numbers on Cisco equipment to assist with support and maintenance activities.

Thema 5

Cisco Infrastructure and Collaboration Infrastructure: This section of the exam measures the skills of a Collaboration Engineer and focuses on Cisco infrastructure devices, endpoints, and collaboration technologies. It introduces network devices, collaboration endpoints like IP phones and video systems, and explains on-premises collaboration deployments using tools like Cisco Unified Communications Manager. It also covers how video systems integrate into collaboration environments and highlights Cisco’s cloud services for enterprise communication, including Webex Meetings, Webex Teams, and hosted collaboration solutions.

>> 800-150 Demotesten <<

Die seit kurzem aktuellsten Cisco 800-150 Prüfungsunterlagen, 100% Garantie für Ihen Erfolg in der Prüfungen!

Jeder Kandidat der Cisco 800-150 Zertifizierungsprüfung ist sich darüber klar sein, dass Cisco 800-150 Zertifizierung eine wichtige Rolle in seinem Leben darstellt. Wir stellen den Kandidaten die Simulationsfragen und Antworten mit ultra-niedrigem Preis und hoher Qualität zur Verfügung. Unsere Produkte sind kostengünstig und wir bieten einen einjährigen kostenlosen Update-Service. Unsere Schulungsunterlagen zur Cisco 800-150 Zertifizierung sind alle leicht zugänglich. Unsere Website ist ein erstklassiger Anbieter in Bezug auf die Antwortenspeicherung. Wir haben die neuesten und genauesten Schulungsunterlagen, die Sie brauchen.

Cisco Supporting Cisco Devices for Field Technicians 800-150 Prüfungsfragen mit Lösungen (Q68-Q73):

68. Frage
A technician must quickly identify multiple Cisco switches in a rack without powering them on. Where should the technician look for serial numbers on the device?

A. Bottom surface of each switch
B. Front panel near the status LEDs
C. Rear panel near the power supplies
D. Top surface of each switch

Antwort: C

Begründung:
Theserial numberfor Cisco switches is typically found on a label located on therear panel near the power supplies. This positioning allows technicians to quickly access identification information even when the device is not powered on.
This label is essential for inventory tracking, RMA procedures, and registration for support. Serial numbers are not typically placed on the top or bottom surfaces for devices mounted in a rack, as those areas are less accessible.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Equipment and Related Hardware

69. Frage
Which function does theStack Port 1 serve on a Cisco Meraki switch?

A. It connects to the Stack Port 2 of the next switch in a stack configuration.
B. It connects to the Stack Port 2 of the previous switch in a stack configuration.
C. It provides a dedicated uplink to the Meraki cloud for management.
D. It serves as a high-speed interconnect for clustered switches.

Antwort: D

Begründung:
OnCisco Meraki switches,Stack Port 1(along with Stack Port 2) is used to form aphysical stacking connectionbetween multiple switches. These stack ports arededicated high-speed interconnectsthat enable multiple switches to operate as a single logical switch.
The stacking topology depends on the number of switches, but Stack Port 1 serves as one side of this high- speed inter-switch communication channel - not for management or cloud access.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Equipment and Related Hardware

70. Frage
What is the primary reason for placing heavier devices toward the bottom of the rack when installing replacement hardware?

A. To simplify device maintenance
B. To improve air circulation
C. To facilitate easier cable management
D. To maintain rack stability

Antwort: D

Begründung:
Theprimary reasonfor placing heavier equipment, such as UPS units or core switches, at thebottom of a rack is tomaintain stability. A lower center of gravity reduces the risk of tipping, especially when the rack is not yet bolted or braced.
This is a standard safety precaution in network hardware installation and is particularly important when racks are being serviced or relocated.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Safety and ESD Precautions Explanation:
The primary reason for placing heavier devices toward the bottom of the rack is to maintain rack stability.
This helps ensure the rack remains balanced and prevents tipping, especially when multiple devices are installed.

71. Frage
Which action must be taken when editing a captured configuration of an old device for reuse in a replacement device?

A. Retain all username entries.
B. Keep all access-listcommands intact.
C. Remove all configurations under line vty 0 4.
D. Add the enable password cisco command.

Antwort: A

Begründung:
Within theFLDTECtraining, especially underMaintenance and RMA Procedures, there is a strong emphasis on safely transferring and adapting configurations from failed or decommissioned devices to replacement units.
The official guidance includes the following:
"When reusing a configuration from an old device, make sure to retain the necessary security elements such as username entries. This ensures the replacement device is still accessible under the correct user credentials." Here's a breakdown of why the correct answer isB:
* A. Remove all configurations under line vty 0 4:This would eliminate remote access settings, making it harder to manage the device.
* B. Retain all username entries:Correct. Keeping the username entries ensures continued secure access and avoids loss of administrative control.
* C. Keep all access-list commands intact:Not always required - ACLs are often tailored to interface- specific settings or environments which may differ between devices.
* D. Add the enable password cisco command:Not a best practice. Default passwords (like cisco) should be avoided for security reasons, and it's not required if enable secret is already in use.

72. Frage
Which Cisco switch series is designed to handle the combined responsibilities of core and distribution layers in a converged architecture?

A. Meraki MS400 Series
B. Catalyst 1300 Series
C. Catalyst 9000 Series
D. Catalyst 6500 E-Series

Antwort: C

Begründung:
TheCisco Catalyst 9000 Seriesis engineered to address the evolving needs of modern enterprise networks by integrating the functionalities of both the core and distribution layers into a unified, converged architecture.
This series offers advanced capabilities such as high-speed data forwarding, enhanced security features, and support for automation and programmability, making it suitable for scalable and efficient network designs.
The Catalyst 9000 Series includes models like the Catalyst 9500 and 9600, which are optimized for core and distribution roles, providing high throughput and reliability. These switches support advanced features like Software-Defined Access (SD-Access) and are designed to meet the demands of cloud-scale and security- focused environments.
In contrast, theMeraki MS400 Series(Option A) is tailored for cloud-managed aggregation and lacks the comprehensive feature set required for core functionalities. TheCatalyst 6500 E-Series(Option B), while historically significant, is considered a legacy platform and may not support the latest advancements in network convergence. TheCatalyst 1300 Series(Option C) is designed for small to medium-sized businesses and is not intended for core or distribution layer deployments.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Equipment and Related Hardware

73. Frage
......

Wenn Sie sich noch anstrengend um die 800-150 Zertifizierungsprüfung bemühen, dann kann DeutschPrüfung in diesem Moment Ihnen helfen, Problem zu lösen. DeutschPrüfung bietet Ihnen Schulungsunterlagen von hoher Qualität, damit Sie die Prüfung bestehen und exzellentes Mitglied der Cisco 800-150 Zertifizierung werden können. Wenn Sie sich entscheiden, durch die Cisco 800-150 Zertifizierungsprüfung sich zu verbessern, dann wählen Sie bitte DeutschPrüfung. DeutschPrüfung zu wählen ist keinesfalls nicht falsch. Unser DeutschPrüfung verspricht, dass Sie beim ersten Versuch die Cisco 800-150 Zertifizierungsprüfung bestehen und somit das Zertifikat bekommen können. So können Sie sich sicher verbessern.

800-150 Testengine: https://www.deutschpruefung.com/800-150-deutsch-pruefungsfragen.html

Joseph Kelly Joseph Kelly

Biographie

Ressources

Support